Veritas Cluster Debugging Tips

Initial Notes

Veritas cluster server is a high availability server. This means that processes switch between servers when a server fails. All database processes are run through this server - and as such, this needs to run smoothly. Note that the oracle process should only actually be running on the server which is active. On BB, the procs light for whichever box is secondary should be yellow, because oracle is not running. BB will page, however if any of the necessary Veritas cluster processes are *not* running.

Cluster Not Up -- HELP

The normal debugging of steps includes: checking on status, restarting if no faults, checking licenses, clearing faults if needed, and checking logs.

To find out Current Status:

/opt/VRTSvcs/bin/hastatus -summary
This will give the general status of each machine and processes

/opt/VRTSvcs/bin/hares -display
This gives much more details - down to the resource level.

If hastatus fails on both machines (it returns that the cluster is not up or returns nothing), try to start the cluster

/opt/VRTSvcs/bin/hastart

/opt/VRTSvcs/bin/hastatus -summary
will tell you if processes started properly. It will NOT start processes on a FAULTED system.

Starting Single System NOT Faulted

If the system is NOT FAULTED and only one system is up, the cluster probably needs to have gabconfig manually started. Do this by running:

/sbin/gabconfig -c -x

/opt/VRTSvcs/bin/hastart

/opt/VRTSvcs/bin/hastatus -summary

If the system is faulted, check licenses and clear the faults as described next.

To check licenses:

vxlicense -p

Make sure all licenses are current - and NOT expired! If they are expired, that is your problem. Call VERITAS to get temporary licenses.

There is a BUG with veritas licences. Veritas will not run if there are ANY expired licenses -- even if you have the valid ones you need. To get veritas to run, you will need to MOVE the expired licenses. [Note: you will minimally need VXFS, VxVM and RAID licenses to NOT be expired from what I understand.]

vxlicense -p
Note the NUMBER after the license (ie: Feature name: DATABASE_EDITION [100])

cd /etc/vx/elm
mkdir old
mv lic.number old [do this for all expired licenses]
vxlicense -p [Make sure there are no expired licenses AND your good licenses are there]
hastart

If still fails, call veritas for temp licenses. Otherwise, be certain to do the same on your second machine.

To clear FAULTS:

hares -display
For each resource that is faulted run:

hares -clear resource-name -sys faulted-system


If all of these clear, then run hastatus -summary and make sure that these are clear. If some don't clear you MAY be able to clear them on the group level. Only do this as last resort:

hagrp -disableresources groupname
hagrp -flush group -sys sysname
hagrp -enableresources groupname


To get a group to go online:

hagrp -online group -sys desired-system

If it did NOT clear, did you check licenses?

Bringing up Machines when fault will NOT clear:

System has the following EXACT status:

gedb002# hastatus -summary

-- SYSTEM STATE
-- System               State                  Frozen

A  gedb001              RUNNING              0
A  gedb002              RUNNING              0

-- GROUP STATE
-- Group           System               Prroobed     AutoDisabled    State         

B  oragrp          gedb001              Y          N               OFFLINE       
B  oragrp          gedb002              Y          N               OFFLINE       

gedb002#  hares -display | grep  ONLINE
nic-qfe3  State           gedb001   ONLINE
nic-qfe3  State           gedb002   ONLINE

gedb002# vxdg list
NAME         STATE           ID
rootdg       enabled  957265489.1025.gedb002

gedb001# vxdg list
NAME         STATE           ID
rootdg       enabled  957266358.1025.gedb001

Recovery Commands:

hastop -all
on one machine hastart
wait a few minutes
on other machine hastart

Reviewing Log Files:

If you are still having troubles, look at the logs in /var/VRTSvcs/log. Look at the most recent ones for debugging purposes (ls -ltr). Here is a short description of the logs in /var/VRTSvcs/log:

hashadow-log_A: hashadow checks to see if the ha cluster daemon (had) is up and restarts it if needed. This is the log of that process.

engine.log_A: primary log, usually what you will be reading for debugging

Oracle_A: oracle process log (related to cluster only)

Sqlnet_A: sqlnet process log (related to cluster only)

IP_A: related to shared IP

Volume_A: related to Volume manager

Mount_A: related to mounting actual filesystes (filesystem)

DiskGroup_A: related to Volume Manager/Cluster Server

NIC_A: related to actual network device

By looking at the most recent logs, you can know what failed last (or most recently). You can also tell what did NOT run which may be jut as much of a clue. Of course, if none of this helps, open a call with veritas tech support.

Calling Tech Support:

If you have tried the previously described debugging methods, we do have support.

Restarting Services:

If a system is gracefully shutdown and it was running oracle or other high availability services, it will NOT transfer them. It only transfers services when the system crashes or has an error.

hastart

hastatus -summary
will tell you if processes started properly. It will NOT start processes on a FAULTED system. If the system is faulted, clear the faults as described above.

Doing Maintenance on DBs:

BEFORE working on DB

Run hastop -all -force

AFTER working on Dbs:

You MUST bring up oracle on same machine

Once Oracle is up, run:

hastart on the same machine as you started the work on (the first on system with oracle running)
wait 3-5 minutes
then run hastart on the other system


If you need the instance to run on the other system, you can run: hagrp -switch oragrp -to othersystem

Shutting down db machines:

If you shutdown the machine that is running veritas cluster, it will NOT start on the other machine. It only fails over if the machine crashes. You need to manually switch the services if you shutdown the machine. To switch processes:

Find out groups to transfer over
hagrp -display
Switch over each group
hagrp -switch group-to-move -to new-system

Then shutdown machine as desired. When rebooted will start cluster daemon automatically.

Doing Maintenance on Admin Network:

If the admin network is brought down (that the veritas cluster uses), veritas WILL fault both machines AND bring down oracle (nicely). You will need to do the following to recover:

hastop -all
On ONE machine: hastart
wait 5 minutes
On other machine: hastart

Doing maintenance in one file system:

1.- Import disk with temporary flag

2.- Freeze the service group

3.- Stop VCS localy

4.-Set out the failover option

 

Manual start/stop WITHOUT veritas cluster:

THIS IS ONLY USED WHEN THERE ARE DB FAILURES

If possible, use the section on DB Maintenance. Only use this if system fails on coming up AND you KNOW that it is due to a db configuration error. If you manually startup filesystems/oracle -- manually shut them down and restart using hastart when done.

To startup:

Make sure ONLY rootdg volume group is active on BOTH NODEs. This is EXTREMELY important as if it is active on both nodes corruption occurs. [ie. oradg or xxoradg is NOT present]

vxdg list
hastatus (stop on both as you are faulted on both machines )
hastop -all (if either was active make sure you are truly shutdown!)

Once you have confirmed that the oracle datagroup is not active, on ONE machine do the following:

vxdg import oradg [this may be xxoradg where xx is the client 2 char code]

vxvol -g oradg startall

mount -F vxfs /dev/vx/dsk/oradg/name /mountpoint [Find volumes and mount points in /etc/VRTSvcs/conf/config/main.cf]

Let DBAs do their stuff

To shutdown:

umount /mountpoint [foreach mountpoint]

vxdg deport oradg

vxvol -g oradg stopall

clear faults; start cluster as described above

1

1